Honda VT1300 Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi,
Does anyone have any information or a link to where i can find a black or chrome next cover for my 2010 Honda VT1300CS Sabre? If you have pix of them on your bike that would be sweet to see too.
Thanks.
 

·
Peace
Joined
·
630 Posts
Hi,
Does anyone have any information or a link to where i can find a black or chrome next cover for my 2010 Honda VT1300CS Sabre? If you have pix of them on your bike that would be sweet to see too.
Thanks.
Check out Hondas site. Thier cover should fit any of the three modles.
 

·
Registered
Joined
·
426 Posts
Check out Hondas site. Thier cover should fit any of the three modles.
Couldn't find a neck cover on Hondas website. If you have a specific link please post. Thanks a bunch.

Not sure if they've been made for the VT series yet.
 

·
Registered
Joined
·
423 Posts
I didn't see neck covers on the Honda website either. There are side covers available but not neck covers. I know that my husband ordered them from JP Cycles for his Suzuki Blvd C90. But I haven't seen that JP cycles is carrying much for the VT 1300s yet.
 

·
Peace
Joined
·
630 Posts
I stand corrected. I could have sworn I seen them on the powersports honda site. I went back to look and did not find them. Maybe it was on one of them hazy nights I was looking around and got confused :) If I find what I was looking at, I will post a link.
 

·
Registered
Joined
·
426 Posts
I stand corrected. I could have sworn I seen them on the powersports honda site. I went back to look and did not find them. Maybe it was on one of them hazy nights I was looking around and got confused :) If I find what I was looking at, I will post a link.
No worries :) What I'm really looking for are chrome lowers that will fit the Interstate. Those would make me a happy camper!
 

·
Registered
Joined
·
17 Posts
That's right, sorry I referred to it as the retro.

You can compare it against the CS catalogue.

Same drawing
http://www.babbittsonline.com/honda-parts#/Honda/VT1300CS_A_(11)_MOTORCYCLE%2c_JPN%2c_VIN%23_JH2SC670-BK100001/FRAME_(2)/VT1300CS-11-JPN-A/2Y14MFYAMFY4F3901B

The question is, is the frame in that are athe same, and will the CR part fit the CS frame.

It appears to be a Interstate and Stateline, they are the same part numbers on the Interstate.
http://www.babbittsonline.com/honda-parts#/Honda/VT1300CT_A_(11)_MOTORCYCLE%2c_JPN%2c_VIN%23_JH2SC667-BK100001/FRAME_(1)/VT1300CT-11-JPN-A/2Y14MFYAMFY4F3900CG

So is there any differnce between the Sabre, Interstate, Stateline neck.

I would try finding someone with one and see how it fits or do some measurements.

My guess is they would probably fit, but you gotta try before you buy
 

·
Registered
Joined
·
426 Posts
I've seen neck covers for fury only problem it says fury int the neck cover
http://www.metricfats.com/product-p/fry-nk-brc-logo.htm
This is interesting looking and it's a neck brace to fill the gap behind the neck - pretty sharp.

I've found this site which appears to sell what you're looking for. The subject line says Stateline but the fitment fine print below reflects VTX so it may be worth a call to them to find out exactly what it fits.
http://www.chromeworld.com/ProductDetails/ProductDetails.aspx?pid=%7B980e62b1-cab8-437f-b417-16bf32f892ba%7D&gid=%7Bf1fb1f0c-7df4-45a1-ac5f-16022363a822%7D&GroupName=Honda+VT1300CR+Stateline+Chrome+Accessories&pname=Chrome+Neck+Covers&Referer=&Alias=&ptct=SGR-SR&CTitle=&
 
1 - 13 of 13 Posts
Top