Steps to Remove the Windshield and Mouting Bracket

Ok, I have posts here on what to do to remove the custom stickers, what to do about the saddle bag clips, and what to do about lighting. Now it is time to get one started on removing the windshield as summer quickly approaches.

I found a post by reading through the buffeting topics, etc that Brew posted and would love to get some images added as well as I plan on doing this for the up coming summer weather here in Cali.

I see he indicated the steps but if we could also add an image or two on the exact bolts for just the screen and the ones for the mounts that would be a huge help and the right order if needed. I do not want to scratch this thing and since I take it to work every day, I'd like to put it on for those cold rides through the mountains in the morning as well. I would leave the mount on for a bit just in case and then take it off as well later.

Thank you!

It is easy to remove the windscreeen, it is a little more difficult if you are also removing the mounts. There
are 4 bolts that hold the screen on, need a 8mm and a 12 mm socket. One of each size on each side, when you remove the larger bolt, there is a spacer between the mount and the screen, make sure you have a hold on it before you remove the lower (larger) bolt so it does not hit the fender. To remove the mounts, the upper is bolted to the upper triple tree bottom, 2 bolts, plus you need to remove the clutch cable from the lever it is routed thru the upper mount. To remove the lower there are 4 bolts that hold it to the lower tree, plus you
need to unbolt the headlight and move it forward to get the mount out.

1 reading

Steps to Remove the Windshield and Mouting Bracket

SendMargaritas

Top Contributors this Month

Recommended Communities